Introduction to Show Production Practice Test

These questions are part of the practice quiz. Start practicing

• What is an essential function of the publicity coordinator related to the audience?
• What is the purpose of a prompt book?
• Who invented the first example of a loudspeaker for the telephone?
• What is a common type of rehearsal used in productions?
• What amplifier mode allows one input of a 2-channel amp to feed both outputs?
• Is it possible to route a dynamics plug-in to a channel on the M32R?
• How is Slew Rate defined in the context of amplifiers?
• What is an 'exit strategy' in the context of a production?
• How many faders are there on the surface of the M32R, excluding the master fader?
• What is the relationship between choreography and production?
• What impedance will 8-ohm speakers wired in parallel yield?
• What role does the stage manager play in a production?
• What does 'technical rehearsal' refer to in show production?
• What is the primary purpose of show production?
• What responsibilities does an assistant director typically have?
• What is a 'stage plot' in show production?
• What do you call speakers positioned on the sides of the stage that face inward?
• What type of load do speakers generally aim for when wired in parallel?
• What is the role of the Production Manager?
• What does the input sensitivity of an amplifier help determine?
• What is the function of a lighting technician during a show?
• Is it true or false that close-miking allows small changes to placement or angle to affect tone?
• What does Input Sensitivity refer to in amplifier specifications?
• What is one of the key components included in a production book?
• What does 'load-in' refer to in a production setting?
• Which console features a variable HPF up to 400hz?
• What advantage can good sound clarity provide for a performance?
• What part of a Compression Driver helps to align sound waves into a coherent wavefront?
• What is the function of volume controls (gain) on an amplifier?
• Which term refers to the technical processes involved in setting up and running audio equipment for a show?
• Who is part of the 'backstage crew' in a theater production?
• What is the color code for 3-phase power in the United States?
• In a parallel speaker configuration, how does the total impedance change?
• What is the total number of Aux Buses (Sends) on the Venice console?
• Are Class A amplifiers typically used as PA power amplifiers?
• Why is it important for technicians to be aware of their environment during a live show?
• How are audience demographics relevant in show marketing?
• What dictates the impedance that an amplifier operates at?
• What does a higher slew rate indicate about an amplifier's performance?
• How many DCA (Fader Groups) are available on the M32R?
• What is a Matrix in a mixing context?
• What can adversely affect sound quality when using multiple speakers in a live environment?
• What happens to the overall impedance when multiple speakers of the same impedance are connected in parallel?
• What type of distortion occurs when two or more different signals interfere and create new frequencies?
• What does live event management primarily involve?
• How many local XLR outputs are available on the M32R?
• What is the model of the digital crossover used in ISP's FOH systems?
• How many Subgroups are available on the Venice console?
• What is a unique feature of how Sends are labeled on the Venice and Verona consoles?
• All Mix Sends on the channels are routed to which component?
• What is Damping Factor in relation to amplifiers?
• What is a common challenge faced during live productions?
• Why is a production team important in show production?
• How should an EQ filter be adjusted when dealing with a feedback frequency?
• What is typically included in a production's post-production phase?
• What happens if the Engineer solos a Mix Master during a show?
• How many digital channels with full processing does the M32R have?
• Which Mix Send acts as the primary level control on the Sienna?
• What is the effect of a well-designed set in a production?
• What is the significance of a production schedule?
• Who is responsible for specifying the equipment used for the P.A. system?
• Where is the optimal place to patch a compressor or gate on an analog console?
• Stage Technicians tend to wear all black in order to blend in with the background and not be easily seen by the audience. Is this statement true or false?
• Will amplifiers typically double their power when the speaker load is cut in half?
• Where are all the Console and Mix settings stored in a production setup?
• Where is the best place to return time-based effects if the console is equipped for this?
• To engage a pre-eq send, which setting must the Aux Send be set to?
• Why is sound clarity important in a performance?
• What is the maximum Power Consumption in Watts that a piece of gear can consume before exceeding the 80% Rule on a 20 Ampere circuit?
• How many total Sends does the Verona have on each channel?
• From where can Matrix Mixers source signal on the Midas consoles?
• What does the term 'blocking' refer to in show production?
• What is the purpose of an audition in the casting process?
• In show production, what is the significance of maintaining equipment?
• Which of the following amplifier classes typically offers improved energy efficiency?
• How many Subgroups does the Verona console have?
• In Ohm's Law, voltage is represented by the letter __ in all the math formulas.
• Do amplifier manufacturers always rate power output at 0.1% THD or lower?
• What is the primary purpose of a rehearsal schedule in show production?
• In what way can a director influence a production?
• What is the impedance load when wiring 16-ohm speakers in parallel?
• Who is the person on a production crew that oversees the load in and load out of the stage and keeps the production on schedule?
• How is the ease of access to the Monitor mixes for the Engineer described?
• What is the main purpose of using a digital crossover in sound production?
• For an amplifier with a Power Consumption of 2040 Watts and operating Voltage of 120 VAC, what is the amount of Current, in Amperes, needed?
• Describe common venue selection criteria for productions.
• What can be a consequence of poor weather planning in an outdoor production?
• Can any bus sends on the M32R be converted to audio subgroups?
• Does the Sienna have Channel Faders that route to a Stereo Buss?
• Which console has a fixed 80hz HPF?
• What is the function of a cue in show production?
• What is typically the primary focus of a production manager?
• Which skill is essential for a production manager?
• How is the Mix Send used on the Sienna differentiated?
• Which impedance would result from connecting two 8-ohm speakers in parallel?
• Why is audience engagement important in show production?
• What is the main purpose of a dress rehearsal?
• What is the default setting/signal flow for the first two sends on the Venice console?
• What is the purpose of a Graphic EQ in audio mixing?
• What measures can be taken to ensure audience safety during a live performance?
• What is the standard AC Voltage for the U.S.?
• What is a major factor in maintaining audience engagement during a production?
• How can a set change impact the pace of a production?
• What is the main role of the Front of House (Band) Engineer?
• What class of amplifier is commonly referred to as a "switching amp"?
• In a professional audio setup, how does a DCX (digital crossover) enhance overall performance?
• What are speakers on the stage floor that face up commonly called?
• In amplifier specifications, what is the typical outcome of a high damping factor?
• What is true regarding an amplifier's ratings and low impedance speaker loads?
• What is one significant challenge associated with outdoor productions?
• Which polar patterns are most effective on a live stage with instruments and monitor speaker systems?
• Where is the best place to patch a compressor or gate on an analog console?
• Which element is crucial in stage lighting?
• For what type of use is a Compression Driver suitable in Concert Sound?
• How does a casting director contribute to show production?
• Why is effective communication crucial in show production?
• What role does a production designer play in show production?
• Which of the following best describes stage blocking?
• What does PFL refer to in the context of audio mixing?
• What is the best area of rejection for a Super-Cardioid microphone?
• What is the impact of a poorly timed set change?
• A Passive Crossover comes _____________ amplification.
• What type of EQ circuit maintains a constant Bandwidth (Q) despite amplitude adjustments?
• Is it true that the higher the frequency, the more difficult it is to control direction/dispersion?
• How many MONO XLR Inputs are available on the Venice consoles?
• On the Midas Verona, which Aux Sends have "Pre/Post" Buttons next to them?
• If an engineer wants flexibility in microphone placement, which type of microphone pattern should they consider?
• What is the purpose of an 'elevator pitch' in show production?
• Define 'post-production' in the context of a live show.
• What happens to the Total Harmonic Distortion (THD) percentage levels as an amplifier approaches rated power?
• How far should you bring down an EQ filter at a feedback frequency?
• How many db/octave is each order of filter?
• How can a theme influence production design?
• Which of the following is a benefit of wiring speakers in parallel?
• What must be done to use the Subgroups for submixing and/or grouping on either console?
• What is the total number of patch points (inputs and outputs) for each channel on the Venice and Verona consoles?
• +4dbu is equivalent to what voltage?
• Which console has bandwidth controls for the mid-bands?
• What role does feedback play in live sound production?
• What does a lower impedance typically allow in an audio system?
• What is the maximum number of channels that can be processed digitally on the M32R?
• How many bus (aux) sends are there on the M32R?
• Of the people listed, who will oversee the Audio Crew and daily setup of the P.A. system?
• What is the importance of a marketing plan for a production?
• Which of the following best describes the role of a director in show production?
• What has a significant impact on the effectiveness of speaker design?
• Identify the primary purpose of lighting design in a show.
• What is a key role of the director in show production?
• Which slots on the M32R are available for time-based FX?
• What would you hear when using an After-Fader Listen?
• How many wires (conductors) are required for single-phase power?
• How many total outputs does the M32R provide?
• The best area of rejection for a Cardioid microphone is at what degree?
• How many Matrix Outputs does the Midas Verona have?
• On an Analog Monitor console, where are the Mix EQs typically patched into?
• What does the term "Head on a Swivel" mean in the context of live productions?
• What is the primary responsibility of a producer in show production?
• How many MONO XLR Inputs does our Midas Venice have?
• What are key responsibilities of a stage manager?
• What must be managed by the maintenance crew during a production?
• Which factor is unimportant for near-field speaker applications?
• What is the primary responsibility of the Monitor Engineer compared to the FOH Engineer?
• How does sound design enhance a production?
• Why is a theme significant in show production?
• Which of the following describes a function of Mix EQs?
• Which frequencies are most likely to be affected by distortion issues?
• If a speaker has a very low set of dispersion numbers, what is it designed for?
• What type of electrical current flows in only one direction?
• Does the Venice console have Mix Inserts for its outputs?
• What is the biggest drawback of Class A amplifiers?
• Which type of amplifier is considered to produce the cleanest sound?
• How does effective maintenance contribute to a production’s success?
• What important component in a movement coil speaker helps transfer sound vibrations?
• What is the actual setting of a Filter/Crossover referred to as?
• What occurs during a production wrap-up meeting?
• How is the direction/dispersion pattern of a speaker typically measured?
• What is the key focus of blocking in a performance?
• How many Mix Sends does the Midas Sienna have?
• How many FX (plug-ins) slots does the M32R contain?
• What key elements are typically included in a production budget?
• What is the number of local XLR inputs on the M32R?
• In what way is a producer involved in the creative vision of a show?
• What is needed to engage a pre-eq send on the Venice console?
• What is a call sheet in show production?
• What are the three conductors in a typical, modern 3-wire wall outlet in the U.S.?
• What type of wiring configuration is used for speakers to provide flexibility in performance?
• What does AFL stand for in audio engineering?
• What impacts the total harmonic distortion in an amplifier?
• When is an omni-directional microphone effective in a live audio situation?
• What is the significance of a production schedule?
• What is the process of intentionally creating feedback known as?
• According to the 80% rule, the safe operational load on a 20 Ampere circuit is what percentage of its total rating?
• What effect does a horn connected to a transducer have?
• What aspect does a scenic designer primarily focus on?
• What is a key feature of technical rehearsals?
• What does daisy-chaining monitors imply in audio engineering?
• Which features does the Venice console provide compared to the Verona regarding Aux Sends?
• What role does a publicity coordinator play in show production?
• In Ohm's Law, current is represented by the letter __ in all the math formulas.
• Signal distortion that occurs at harmonic intervals is known as what?
• When configuring a sound system, why is it important to consider speaker impedance?
• Does a Passive Crossover have numerous user settings and adjustments?
• Which console requires the user to assign a Channel to one group at a time?
• Can the number of inputs and outputs on the M32R be expanded via external stage boxes?
• What are the two components utilized by a Dynamic speaker to create movement?
• What is a production book?
• What essential factor must be considered when setting up a loudspeaker system in a concert?
• What is the strength of the PADS on the Verona and Venice consoles?
• If a Channel Aux Send lacks a "Pre/Post" Button, where is this function most likely found?
• What type of listen does the Solo button provide when associated with a Mix Master?
• What is meant by the term 'audience engagement' in a production?
• What is the role of a line producer in show production?
• An Active Crossover comes _______________ amplification.
• What is the voltage standard for the United States as it applies to Alternating Current from a 3-prong Edison wall outlet?
• What does Time-Correction ensure in a sound production setup?
• What is the main responsibility of a maintenance crew in show production?
• Which of the following best describes an effective production budget?
• What is the function of a DCA in the M32R?
• What does Class D mean regarding amplifier types?
• What is the primary responsibility of a prop master?
• In live sound, microphones used for live performances are typically placed how in relation to their sources?
• What type of Inputs do the Venice and Verona consoles use?
• During which phase of the production process does 'load-in' occur?
• Why is effective communication important in show production?
• In an electrical circuit, what is the purpose of the ground wire?
• Which formula is used to calculate the amount of Current, or load, in Amperes required by a piece of equipment?
• When Mono Mixes are converted to Stereo on the Sienna, which send function is assigned to Pan?
• What is the function of a crossover in audio systems?
• Which component is essential for measuring voltage in an electrical circuit?
• What distinguishes blocking from staging in a production?
• What differentiates a scenic designer from a costume designer?
• The reputation of a speaker is often based on what attribute?
• An important aspect of the Front of House Engineer's role is to?
• What is the name of the system that allows the Engineer to listen to Monitor mixes from their console area?
• What does the hot wire in a circuit do?
• How many wires (conductors) are required for 3-phase power?
• How are stereo microphone setups usually configured for overheads in live sound?
• What feature is unique to the process of creating individual mixes for performers during a show?
• Which part is NOT one of the basic components of a Compression Driver?
• How many total Sends does each channel have on the Venice and Verona consoles?
• What does effective audience engagement contribute to a production?
• Which of the following are the three main components of show production?
• Can two floor monitors placed for an artist be wired as separate channels?
• Do modern digital consoles typically come with built-in graphic equalizers?
• What is the primary purpose of a soundcheck in show production?
• What must engineers adhere to when double miking an instrument on a live stage?
• Which console includes a pair of 1/4" Inserts for two of the Aux Sends?
• Which console has a greater number of Subgroups?
• Which of the following is NOT a benefit of using a Class D amplifier?
• In what year was the first experimental moving coil speaker invented?
• Why is audience feedback essential in show production?
• What is the primary function of a bridged amplifier mode?
• What is the best place to route time-based effects on any Analog Console?
• What does set design entail in a production?
• What is the primary role of a digital crossover in live sound settings?
• The rolloff rate of a filter is typically expressed in what unit?
• What does the backstage crew primarily handle during a live performance?
• What are the three conductors in a typical, modern 3-wire Edison wall outlet in the U.S.?
• What are the three main factors that differentiate one microphone model from another?
• Which Aux sends have the potential for routing to Time-Based Effects on an analog console?
• Which aspect is crucial during a soundcheck?
• Which of the following is NOT a responsibility of a stage manager?
• What is the primary function of Mix EQs on a production system?